Title graphic that reads Pool Table Parts Names

Pool Table Parts Names: A Simple Guide to Every Part of a Billiards Table

Quick answer: The main parts of a pool table are the rails, cushions, pockets, diamonds, playing surface (bed), slate, cloth, apron, frame, and legs. The table also has markings: the head string, the head spot, the foot spot, and the foot string. The area behind the head string is often called the kitchen. Knowing these names helps you understand rules and follow lessons.

Title graphic that reads Pool Table Parts Names
Knowing the names of pool table parts makes rules, lessons, and repairs much easier to understand.

When you start playing pool, you hear lots of new words. “Ball in hand behind the head string.” “Aim at the second diamond.” This guide explains each part in plain English.

The Main Parts

Part What it is
Rails The top edges around the table. The cushions are attached to them
Cushions The rubber bumpers covered in cloth that balls bounce off
Pockets The six openings: four corner pockets and two side pockets
Diamonds Small markers on the rails used for aiming and position
Bed The flat playing surface
Slate The heavy stone under the cloth that keeps the bed flat
Cloth The fabric covering the bed and cushions, often called felt
Apron The outside panel below the rails
Frame and legs The structure that holds everything up

Rails and Cushions

People often use rail and cushion to mean the same thing, but they are a bit different. The rail is the wood top edge. The cushion is the rubber part attached to the inside of the rail. When someone says “hit the rail first,” they mean the cushion.

The two longer sides are called long rails. The two shorter ends are called short rails. The short rail at the end where you break from is the head rail. The other end is the foot rail.

Pockets

Most pool tables have six pockets: one in each corner and one in the middle of each long rail. Side pockets play differently from corner pockets because of their shape. Some tables have ball returns that send balls to one spot. Others have drop pockets with a pouch or basket.

Diamonds

The diamonds are small inlays on top of the rails. On most tables, there are three diamonds between each pair of pockets. Players use them to plan bank shots, kick shots, and cue ball position. Some tables use dots or other shapes instead of diamonds, but people still call them diamonds.

Slate and Cloth

Better tables use slate for the bed because it stays very flat. Many slate tables use three pieces of slate that are leveled and joined. The cloth is stretched tight over the slate. Cheaper tables may use other materials instead of slate.

Table Markings

Marking Where it is Why it matters
Head string An imaginary line across the table at the second diamond from the head rail Many games say you break from behind it
Kitchen The area behind the head string Some rules limit where you place the cue ball after a scratch
Head spot The spot in the middle of the head string Used in some games for spotting balls
Foot spot A spot on the foot half of the table, at the second diamond from the foot rail Where the front ball of the rack goes
Foot string An imaginary line through the foot spot Used in some rules
Long string An imaginary line from the foot spot to the middle of the foot rail Used for spotting balls in some games

Rules can differ by game and league. Always check the rules you play by. For example, see straight pool rules and rotation pool rules.

Other Handy Terms

  • Jaws: the inside edges of a pocket.
  • Points: the tips of the cushion at each side of a pocket.
  • Nose: the edge of the cushion that touches the ball.
  • Rail bolts: bolts that hold the rails to the slate.

Why It Matters

Knowing table parts helps you follow lessons, understand rules, and talk with a table mechanic if something needs repair. If you are shopping, read our guide on pool table sizes. And if you are new to the game, see difference between pool and billiards.

Keep Reading on This Site

Frequently Asked Questions

What are the main parts of a pool table called?

The main parts are the rails, cushions, pockets, diamonds, bed, slate, cloth, apron, frame, and legs.

What is the kitchen on a pool table?

The kitchen is the area behind the head string, at the end of the table where you break from.

What are the dots on the pool table rails for?

They are called diamonds and help players aim bank shots, kick shots, and position.

What is the difference between a rail and a cushion?

The rail is the top wood edge. The cushion is the rubber bumper on the inside of the rail that balls bounce off.

Why do pool tables use slate?

Slate stays very flat and steady, which helps balls roll true.